Threaded fiber rebar

Threaded fiber rebar

Threaded fiber rebar is a strong product that is resistant to impact, tension and abrasion and has excellent mechanical strength. One of the components of this rebar is linen fabric.

The heat tolerance of threaded fiber rebar is as follows:

The value is 120 degrees Celsius for heavy use of this rebar.
The minimum temperature is set in the range up to 65 degrees Celsius.
The maximum that this rebar can withstand; The temperature is up to 150 degrees Celsius.
Threaded fiber rebar comes in a variety of brown, yellow, and near-red colors.

This product has dielectric properties and is used for electrical insulation.

This rebar has the ability of electrical insulation, less water absorption, resistance to chemical corrosion and oxidation and good performance in low acid environments.

The components of threaded fiber rebar include the following:

Linen or cotton fibers 2. Fine pieces of wood 3. Epoxy resin or phenolic resin (as adhesive)
Threaded fiber rebar with its remarkable advantages is used in the manufacture of parts subject to friction, such as bushing, and in environments with oil and moisture with good resistance.

The most important advantages of fibrous fiber rebar include:

It has a non-protruding and smooth surface.
For high use, the maximum value set is up to 120 degrees Celsius.
It has excellent impact, tensile and abrasion resistance and mechanical resistance.
Easy to punch, easy to install and operate.
It has a low coefficient of friction.
Has the ability to absorb vibrations.
It has the ability of electrical insulation and has an acceptable dielectric property.
It works well in open air and oil-rich environments.
In this part of the article, we will discuss some of the applications of this popular product:

This product is used to make small gears and simple bearings.
Threaded fiber rebar is used in the production of equipment that is subjected to electrical and mechanical pressures.
Used for electrical insulation of industrial parts.
Production of parts such as spacer and liner that are subject to friction.
Threaded fiber rebar with its extraordinary mechanical strength has been very popular; This rebar has a density of 1.4 to 1.2 grams per cubic centimeter.