Rubber asbestos packing

Asbestos Rubber Packing
It is better to first of all examine what is loss?
Asbestos is the name given to a group of six silica ores. These rocks have a very soft, narrow, long, needle-shaped fibrous texture. Asbestos is naturally found in many parts of the world. And from an industrial point of view, it can be divided into the following three main groups:

1. White asbestos or chrysotile
2. Brown asbestos or amosite
3. Blue asbestos or crucidolite

White asbestos is the least dangerous and common type of asbestos, less released into the air. Hence, it is mostly used in industry. The largest white asbestos mines are located in the Canadian serpentine cliffs.
Tires:
Rubber is defined as a material that has elastic properties. Its most important property is stretching, so that sometimes it stretches up to 60 times its original length. Natural rubber loses heat when stretched and absorbs heat when it returns. In general, rubber is a material that has low elasticity, elongation and high shrinkage. The term polymer is used to describe rubber in the raw or non-composite state. One of the advantages of rubber, especially synthetic rubber, is that it is low and high. The desired properties can be achieved by combining it. And it should be noted that the properties of the raw polymer do not represent the composition and properties of rubber in the final state because to achieve some of the desired properties for a tire we need a long process and the same time for the process increases the price of rubber. In general, it has a low modulus of elasticity and is therefore able to withstand deformation of up to more than one thousand percent. Tires also have a springy property and are used as dampers.

Rubber is not perishable and does not normally need lubrication. Its hardness increases over time so that after vulcanizing the rubber (combining with sulfur) after a few hours at normal temperature, its hardness increases sharply.
Rubber packing.

Rubber asbestos packing of high quality asbestos fibers whose surface is impregnated with rubber and graphite
Prepared .
This packing is available in two types: pure and hardened with metals such as copper wire.
Inconel wire and stainless steel wire are produced and supplied d.
This packing is used in high pressure and temperature, especially in high pressure tanks and boilers.
This type of packing is made of asbestos fibers and is woven in round and rectangular types.
Temperature tolerance of this type of packing is 600 to 720 degrees Celsius.
Suitable for high-altitude environments in a variety of industries.
One of the main advantages of asbestos packing is its long life
High quality asbestos fibers are prepared, the surface of which is impregnated with rubber and graphite.
This packing is available in two types: pure and hardened with metals such as copper wire.
Incline wire and stainless steel wire are produced.
This packing is used in high pressure and temperature (especially in high pressure tanks and boilers).
And can withstand pressure of 150 bar and temperature of 500 ° C.