Edge Banding machine 2600 - ariamachinery

2600 Edge banding machine which is plc controlled,  and with its innovative, has ergonomic structure and the fastest, shortest and easy to be used system and design is patented to HAKİ SABIR is designed for PVC, foil, lining melamine and abs applications thickness of which is from 0.4 mm up to 3mm for workshops, factories and outsourcers with its highest quality.

•   Systems that are used over years are patented to HAKİ SABIR
•   Pallet system covered with rubber for gripping narrow and big parts
• Height adjustment and centering is carried out with automatic lifting system 
•   Plc controlled  setting application.
•  Pre-Melting System
•   Step Motor Pvc Driver 
•   Thin-thick pvc automatic pass 
•   Side press that does not apply pressure to patented front and rear overplus 
•   Fast and easy setting and installation.
•   Patented manufacture system, stabilized hard monobloc structure and high product quality..
•   Patented cutting systems, minimized nonvibration operation  
•   Wide pallet, interlaced chain.
•   Nonproblematic equipment, machinery safety systems, 2 years warranty.

CONTROL SYSTEMS: Controls of all operating units such as opening- end cutting, half concave milling, thin-thick pvc automatic pass, normal soft mdf, item counter, quantities meter, pricing are carried out over plc colored touch screen. High frequency motors are controlled by convertors and includes emergency switches. Electronic systems are lidded and sealed to protect from dust etc. environments.            

MAIN CHASSIS: which is covered with rubber patented to HAKİ SABIR grips narrow and big parts.. It is the shortest machinery of all class produced for monobloc steel and measured accurately to provide maximum smoothness, right settings and exact contact to the ground.

FEEDER AND OVERPRINTING: Rubber covered  pallet system comprises of polyamide and rubber pallets that are connected to jointed chains over accurate processed steel bed. Height adjustment and centering is carried out with automatic lifting system. 

GLUE SPREADING: Innovative Pre-Melting Glue Tank System Consume Less Than 70 % Glue & Electric Compared To Other Edge Banders.It comprises of hot-melt glue melting and spreading and operating independent from pallet. For heat control, 2 pieces thermostat and 2 pieces steel cracker heated.

ROLLING & CUTTING:Step Motor Pvc Driver cutting & pulling system patent of which belongs to HAKİ SABIR, has the capacity of cutting the edge banding materials up to 10 mm thickness and 50 mm height. It does not require any adjustment in change over from thin material to thick material.

PRESSİNG ROLLERS: The proximity switch and plc controlled pneumatic system patented to HAKİ SABIR comprises of 2 rollers. Being gripping drive, the initial printing carries out printing settings automatically. This is the only machine that does not apply pressure to the overplus that are in front and rear part of the material to be glued. 

: The system patented to HAKİ SABIR, is start, end and upper processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

 The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.