Dry block temperature calibrator, Model : Pulsar, Up to 600c

Dry block temperature calibrators Made by GIUSSANI by Very good Accuracy, Stability and Uniformity is very usefull for calibrate the thermocouples, and Resistant Thermometers

Supplier information

TAK SAN TAM AZMA / Testa

Iran (Islamic Republic of), Tehran

Importer, Wholesaler, Retailer, Service provider

Supply and provide measuring Instruments, Supply and provide calibration instruments, After sale service guaranty waranty, consult build & equipe the calibration laboratory, ISO-IEC 17025

View supplier website

Contact the supplier

Specifications

Range: Amb. to 600c
Resolution: Up to 0.01c
Stability: 0.05c

Product description

PULSAR-35Cu temperature calibrator is a compact instrument used to calibrate transducers, RTD and temperature-measuring sensors in the field and in the laboratory. The possibility to generate positive and negative temperature ramps makes it suitable for use in calibrating and testing thermostats.
TECHNICAL CHARACTERISTICS:
PULSAR-35Cu temperature calibrator consists of a metal block measuring 50 mm in diameter heated by a resistance which winds around the outer surface of the block.
A hole having diameter 35 x 190 mm is made in the block for the appropriate reduction inserts.
PULSAR-35Cu is equipped with a PID microprocessor controller with a resolution up to 0,01 °C, setting of the standard of measurement in °C, °F and K programming of ascent/descent ramps and storage of the thermostats’ operative temperature.
In PULSAR-35Cu-2I version the instrument is equipped with an acquisition card having two adjustable inputs able to read: Pt100 3/4 wires & thermocouples: E, J, K, N, R, S with automatic compensation of the cold junction.
The REF input is provided for the reference sample probe, thus obtaining a complete calibration system which can be certified by Accredia centres, in compliance with ISO 9000 regulations.
The EXT input is provided for probes that are being tested; hence, the instrument can display the temperatures of the furnaces, the temperature of the sensor to be checked and of the reference sample probe, at the same time.
Furthermore, PULSAR-35Cu is equipped with the RS232 serial interface; it can operate in automatic mode connected to the PC by means of the AQ2sp software which enables to carry out probe calibrations and cyclical life tests; test results can be stored and printed, so they are easily traceable in compliance with ISO 9000 standards.

Technical Specification

Model : Pulsar

Range : Amb. to 600 c

Resolution : 0.1 /0.01 c

Stability : 0.05 c

Well Diameter : 50 mm

Insert Hole Depth : 185mm

Unit of measurement : C, F, K

RS232 Interface

In two different version
Version : Basic

Version : 2I (Contain 2 Thermometer to measure themocouples and PT100)

Made by GIUSSANI

Made in Italy