G8.8 bolts are high tensile bolts that are connected with G8 nuts. these grades of industrial bolts are nuts are used for machinery assem...

Carbon steel stud bolts are manufactured in different grades of B7 , B16 and in various size from 1/4 to 7 inches. the higher the diamete...

Hex bolts are manufactured according to different standards and consist of different materials. Grade 8.8 hex bolt is one of the most pra...

Metric M10 threaded rod are available in both steel and stainless steel grades. Metric M10 threaded rod usually come in 1 meter of length...

Flange and pipe fittings vary from bolts and nuts to seals and gaskets. stud bolts are the most common components that are used to fasten...

Fully threaded hex bolts are manufactured following DIN933. these hex bolts along with Allen bolts are main machinery connections. Class ...

A handful of bolts and nuts are not widely used and in many of the cases need to be specifically designed and produced. Ajaxbolt co manuf...

cap head screws are widely used type of fastener with more modern design than hex bolt. cap head screws are manufactured usually partiall...

Ajaxbolt Co. is an Iranian manufacturer and distributor of socket cap head screws both carbon steel and stainless steel in different size...

stainless steel threaded rods are used in construction and for corrosion resistance. different grades of threaded rod have different mech...

Ajaxbolt Co. is an Iranian manufacturer and exporter of hex bolts and structural bolts of different class. Class 12.9 Bolts are usually a...

Metric nuts are manufactured according to DIN934 standard. metric nuts have different grades like bolts and are manufactured in different...

Ajax bolt co in association with Iran all export company is ready to supply all kinds of stud bolts from Iran to border countries includi...

Fully threaded bolts are usually manufactured from low class steel to avoid breaking since carbon steel bolts are very fragile in spite o...

Ajaxbolt co is an Iranian importer and distributor of flat washers manufactured according to DIN125 standard.

Ajaxbolt Co is an Iranian importer of all kinds of industrial bolts and fasteners including Class 8.8 partially threaded cap head screws ...

Ajax bolt Co. is an Iranian manufacturer of J anchor bolts to be used to bear the load of concrete walls by hooking the round part around...

Dacromate plated bolts and nuts are widely used in different industries due to high humidity resistance and the ease to use them compared...

Nuts play a very important part in every bolt and nut connection and depending on their application and the load applied on them are manu...

Class 12.9 bolt has the highest percentage of carbon among all bolt materials and has had heating and tempering process on its rod prior ...

Class 8.8 bolts are one of the most common structure of hex bolts in the market. they provide acceptable rate of strength and hardness si...

Hex Bolt DIN6914 also known as structural bolt, has a higher tensile and sheering stress than standard DIN933 or DIN931 and is usually us...

Stainless steel bolt and nuts have high humidity resistance and therefore are used widely in coastal services. stainless steel bolts and ...

Hot galvanized hex bolts and nuts that were widely used just a while ago provide high temperature and humidity resistance, however, they ...

Ajaxbolt Co. is an Iranian manufacturer and exporter of hex bolts and nuts. Carbon Steel hex nut, Stainless steel hex nut DIN934, DIN6915...