<< FEATURES & CHARACTERISTICS >> COMMODITY : PER SPECIFICATIONS, LOW POUR FUEL OIL (LPFO- VD6)

D6 LOW POUR FUEL OIL (LPFO-VD6)

<< FEATURES & CHARACTERISTICS >>
COMMODITY : PER SPECIFICATIONS, LOW POUR FUEL OIL (LPFO- VD6)

*Method Test Result
-ASTM D5002 Density and Relative Density of Crude Oils
-Average API Gravity : 28.7 (28.7) (Min) API
-ASTM D1298-99 Density @15 deg C : 0.87 (0.8775)(Max) Kg/t
-ASTM D97 Pour Point of Petroleum Products;
C Pour Point : < - 33.0 (-36.0) (BELOW ZERO)
F Pour Point : < - 27.4 (-32.8) (BELOW ZERO)
-ASTM D93-IP 34 Pensky-Martens Closed Cup Flash Point;
Corrected Flash Point : 117 (137) (MIN)
-ASTM D4294 Sulfur Content in Petroleum Products by EDXRF;
Sulfur Content : 0.35 Wt % (MAX)
-ASTM D445 Kinematic /Dynamic Viscosity;
Kinematic Viscosity @ 122 deg F/ 50 deg C : 83 (18.12) (MAX) Mm2/s
-ASTM D6304 Water Content by Coulometric Karl Fisher;
Titration Water Content : 0.20 (0.7) (MAX) Wt %
-ASTM D482 Ash from Petroleum Products, Average Ash 0.279 (1.007) (MAX) Wt %
-ASTM D2161 Conversion of Kinematic Viscosity,
-To SUS/SFS 1 Saybolt furoi viscosity @122 deg F : 10.9SFS (MAX)
-ASTM D5184 Aluminum and Silicon in Fuel Oils by ICP-AES or AAS;
Aluminum Content : 102 (MAX) Mg/kg
Silicon Content : 93 (MAX) Mg/kg
-ASTMD95 Water by Distillation, vol % : 0.70 (MAX) vol %
-ASTMD4530.06 Carbon Residue : 1.11 (MAX) Wt %
-Method Test Result Units IP 143 Asphalteness (Heptane Insolubles);
Asphaltene Content 0.080 Wt %
-P 501 Determination of AL, Si, V, Ni, Fe, Na, Ca, Zn, P in Fuel Oil-ICPES;
Aluminum : 372 mg/kg
Silicon : 187 mg/kg
Sodium : 117 mg/kg
Vanadium : 1 mg/kg
Calcium : 779 mg/kg
Zinc : 298 mg/kg
Phosphorus : 4176 mg/kg
Iron : 545 mg/kg