* Knowledge silk screen

* Knowledge silk screen

Knowledge silk screen 1

  Learning Theory silk screen printing
 

Foundation of the net printing on silk
Based on a template made ​​of wood or metal frame
A light-sensitive drug, gelatin, soaked and washed after exposure and color printing can be done on objects, but before the printing operation during printing and after printing to be done.
  This leaflet is offered as a brief training enthusiasts are silk, silk is very economical in terms of labor costs and operate with a minimum capital start with several million Bashd.aksr jobs that today there is the cost of printing tuman there is a possibility of a small fee to set up a workshop full of ingredients found in all cities.
List:
1 page
2 clamps
3 Workbench
4 template or framework
5 Tour
6 knives Yaaskvyjy
7 drug
8 Retarder
9 Cleaners
10 colors
11 light table
12 Plan
Dryer 13.
14 Print
15 Printing Applications
16 The probable errors in the printing

1-page:

One important feature flat screen printing machine screen is working. Dent or bulge makes the print very well done page. It's made ​​no difference, but for now the pages of chipboard, MDF and iron plate is made. Thick plates should be taken so that the pressure does not change the color on the screen if it was poured over it, the faster it will be true. The more professional work, the plates underneath the mounting holes and suction device to make it fully adheres to the screen. Size of plates depends on the type of printing.
Conservatives usually prefer print
It's great to have a broad and
To be deficient in Print
And of course many yards Print page same page table that is economically useful early work, but there are several problems: First, the color gradually on the table, and scratches, and other issues ruining Defectiveness table is printed after recommend the page is separated by conventional desk. The current size is 30 × 40 and 40 × 50 and 50 × 60 and 60 × 70 are of the longitudinal work desks and claim that over 100 × 300 for textile printing benefit.

2-clamps and hinges:

Clamps and hinges on the page is important. Close the context desk clamp Bvsyah done. The main roles are usually a few screws. Step bolts are screw-bolt is not much different, but the thickness of eight or ten is the number of screws depends on the size of the context. Most templates can be closed with two screws. Screw length should be long enough to be able to fully tighten the context of the course, if the screw is like a strap to put pressure on the context, but it does not corrode wood screw clamp side screw height adjustment to allow to objects of different heights with a printing device.
But if you do not need height adjustment screws with the hinge pin can be no simple task to install the system, however, we suggest you clear the Silk benefit that the device height adjustable
 

3-desktop:
The information desk, desk height is important, the print job is directly related to height-height tables, short tables and long benches will fail, causing the curve of the waist and slowly work hand fatigue. Width and height of the object on the table is printed. For a long time have a long table, but widescreen LCD for a print job does not require a long table. Desk should have a thin base must be firm and, Nlghzd and Nlrzd and connection plate and the base should be quite strong. Land that it sits on a desk, table and floor must be smooth and clean, and the cleaning is essential.
4 Template:
0 frame or frames made ​​of wood or metal is mostly aluminum. Some tips on making the use of context is important, no sharp edges, the complexity and lack of context is important. Width and length depending on the context, and usually must be at least five inches larger on each side of the project. The thickness of a formula that depends on the width and length, but in the traditional workshop formats are 4 × 4 - 3 × 5 and smaller than 2 × 4 are used. When making a template, the tongue is very important
, Sometimes just stick their head-to-head nails, and over time will cause the complexity of the form. If you have mold half and half tab of metal to be welded and seamless inside can not be that color.
If the wood is better wood or oil paint to dry completely at least twice to get a better resistance to moisture.
Cleaning molds, is a fundamental and important, should be thoroughly washed after it prints the form of traces of paint did you stick form is already saturated with oil, cleaning it easier.