Cap head screws and hex bolts are usually produced and distributed in G8.8 and partially threaded. many of the other types of bolts are a...

Ajaxbolt co is an Iranian importer and distributor of flat washers manufactured according to DIN125 standard.

hex bolt and cap head screws are both important fittings. grade 8.8 of carbon steel is an average base carbon steel with 800 Mpa tensile ...

Wood screw is a type of sharp screw that is used for wood connections. wood screws are usually available in low carbon steel and with Gal...

Flange and pipe fittings vary from bolts and nuts to seals and gaskets. stud bolts are the most common components that are used to fasten...

stainless steel stud bolts are manufactured in 2 different grades. the most common one is B8 which is made of G304 of stainless steel. th...

Allen Bolts or cap head socket screws are usually manufactured partially threaded and of 8.8 or 12.9 class according to DIN912 standard.

Cap head screws are manufactured following DIN912 standard. Cap head screws are available in different grades from steel 4.8 to carbon st...

Socket cap head screws are produced from carbon steel grades 8.8 and 12.9 by default and according to DIN912 standard. however, market ha...

Metric M10 threaded rod are available in both steel and stainless steel grades. Metric M10 threaded rod usually come in 1 meter of length...

Ajaxbolt Co. is an Iranian Manufacturer and exporter of Dacromet Bolts and Nuts to Baghdad and Erbil Iraq. Exporting Hot deep galvanized ...

Carbon steel stud bolts are manufactured in different grades of B7 , B16 and in various size from 1/4 to 7 inches. the higher the diamete...

L7 bolts are manufactured specifically to work in very cold environments with temperature as low as -65 degrees centigrade. L7 bolts are ...

G8.8 is carbon steel grade bolt that is used along with G8 nuts in different metric sizes. these bolts are low humid resistant therefore ...

Coating metals has always been a good way to protect it from humidity and corrosive substances. Depending on the sensitivity of metal, de...

Stud bolts are manufactured following A193 standard with inch type threads. stud bolts are available in different grades of carbon steel ...

Socket bolts are usually manufactured partially threaded and with classes 8.8 and 12.9. However, ajaxbolt co. is ready to manufacture var...

stainless steel threaded rods are manufactured using G304 stainless steel. threaded rods are main installation fittings and are used in c...

A4 stainless steel bolts are widely used in many industries where corrosion resistance is an important factor. A4 stainless steel bolts c...

Allen bolts are manufactured with different materials. A2 stainless steel Allen bolt that uses G304 of stainless steel rod in production ...

Hex bolts are manufactured according to different standards and consist of different materials. Grade 8.8 hex bolt is one of the most pra...

Cap head screws are widely used for machinery fastening. these strong fasteners are manufactured in different standards.

Ajaxbolt Co is an Iranian manufacturer of 2H nuts for stud bolt connections. 2H nuts are specifically manufactured to be fastened on Stud...

cap head screws are widely used type of fastener with more modern design than hex bolt. cap head screws are manufactured usually partiall...

Fully threaded Stainless steel hex bolts weigh 31.2 gr and are commonly used in oil industries and in humid environments due to their res...