Dry block temperature calibrator, Model : Pulsar, Up to 600c
Dry block temperature calibrators Made by GIUSSANI by Very good Accuracy, Stability and Uniformity is very usefull for calibrate the thermocouples, and Resistant Thermometers
مشخصات
- Range :
- Amb. to 600c
- Resolution :
- Up to 0.01c
- Stability :
- 0.05c
Product description
PULSAR-35Cu temperature calibrator is a compact instrument used to calibrate transducers, RTD and temperature-measuring sensors in the field and in the laboratory. The possibility to generate positive and negative temperature ramps makes it suitable for use in calibrating and testing thermostats.
TECHNICAL CHARACTERISTICS:
PULSAR-35Cu temperature calibrator consists of a metal block measuring 50 mm in diameter heated by a resistance which winds around the outer surface of the block.
A hole having diameter 35 x 190 mm is made in the block for the appropriate reduction inserts.
PULSAR-35Cu is equipped with a PID microprocessor controller with a resolution up to 0,01 °C, setting of the standard of measurement in °C, °F and K programming of ascent/descent ramps and storage of the thermostats’ operative temperature.
In PULSAR-35Cu-2I version the instrument is equipped with an acquisition card having two adjustable inputs able to read: Pt100 3/4 wires & thermocouples: E, J, K, N, R, S with automatic compensation of the cold junction.
The REF input is provided for the reference sample probe, thus obtaining a complete calibration system which can be certified by Accredia centres, in compliance with ISO 9000 regulations.
The EXT input is provided for probes that are being tested; hence, the instrument can display the temperatures of the furnaces, the temperature of the sensor to be checked and of the reference sample probe, at the same time.
Furthermore, PULSAR-35Cu is equipped with the RS232 serial interface; it can operate in automatic mode connected to the PC by means of the AQ2sp software which enables to carry out probe calibrations and cyclical life tests; test results can be stored and printed, so they are easily traceable in compliance with ISO 9000 standards.
Technical Specification
Model : Pulsar
Range : Amb. to 600 c
Resolution : 0.1 /0.01 c
Stability : 0.05 c
Well Diameter : 50 mm
Insert Hole Depth : 185mm
Unit of measurement : C, F, K
RS232 Interface
In two different version
Version : Basic
Version : 2I (Contain 2 Thermometer to measure themocouples and PT100)
Made by GIUSSANI
Made in Italy