Aerial Lift Safety

into consideration, and obviously lifters are no exception to this. The lift must have the strength, strength and stability to carry loads or people and be on a surface that has a reliable reliance on the load. The maximum capacity of a load or person should be specified on the lifting body and in its catalog, and if the user does not observe the capacity of the device, the lifting device must be prevented by the security equipment and be alerted by the user to the lift. The load and anything connected to it, or used for lifting loads, must be of sufficient strength and strength. Lifting equipment Individuals should have a good protection to protect the device from crushing, stuck and falling. To prevent the lift from falling, you must have the right tools and equipment, such as a jack and balance weights, and if the user stops in the lift, it is not at risk and can be easily released. The wind speed, surface gradient and other environmental factors affecting the lift and lift equilibrium when using the lift should be observed according to the device catalog and safety instructions. The wind can cause lifting overturning, severe shocks and lifting insecurity. Damage to altitude and even damage. The resistance of the lift in front of the wind is different depending on the type of lift, the lift mechanism and its lifting capacity, and usually lighter lifts are less resistant to wind. Lifting equipment should be fully secured and in an appropriate environment to reduce the risk of collision and the risk of collisions between persons with a lifting device or lifting mast